Why do spinning reels have reverse

why do spinning reels have reverse

Among all the spinning reel components, the anti-reverse switch on spinning reels causes the Why Do Spinning Reels Have Anti-Reverse. The final component to understand on your spinning reel is the anti-reverse switch. This feature is typically located at the bottom of the reel and can be a. Their opinion is that the reels last longer if they do not have the anti reverse on a spinning. why do spinning reels have reverse

Similar video

5 Spinning Reel Mistakes to AVOID (AND How to Fix Them)

Fishing reels are evolving every day, thanks to technology! But the more it develops, the more complicated it gets to handle these reels. Don’t stress if your fishing reel is going backward, you are not alone. In fact, it is very common.

Why does fishing reel go backwards?

If your fishing reel is going backwards, why do spinning reels have reverse, it is probably because of your anti-reverse switch, problems with the bail, why do spinning reels have reverse, or issues caused by the drag system. Otherwise, a component of your anti-reverse switch, drag system, or bail might be damaged due to poor maintenance.

You can fix these complications on your own but in some cases, going to a sports shop is necessary. And in extreme cases, why do spinning reels have reverse, you might have to change your fishing reel completely.

4 reasons why fishing reels go backwards

Issues with the anti-reverse switch

Most fishing reels come with an anti-reverse switch which makes the reel spin backwards. It could be going backwards because the switch is always turned on. Otherwise, the anti-reverse switch might be stuck in the off position. 

If it is not either of these then there may be parts of the anti-reverse component that are broken or assembled in the wrong position. 

There could be anti-reverse clutch problems. The spring in your spinning reel might be disconnected or the hammer piece of your anti-reverse system could be stuck on the latching gear.

In the case of your baitcasting reel, the anti reverse bearing can be bad or worn out. 

The drag system

Controlling the drag system can be tricky. It can’t be too low and has to be in the correct setting for fishing comfortably. 

The drag system functions with the anti-reverse and controls the pressure input by the fish on the line. Your fishing reel might be going backwards because of crossing the pressure limits of the drag. 

As a result, the line will get out of the fishing reel if too much pressure is applied by the fish.

Sometimes the star drag can be loose too. 

Another reason could be from broken components of the drag system or due to poor maintenance of the system.

The Bail

The Bail acts as a guide for the line on the spool, why do spinning reels have reverse. It can be open and closed to take out the line, casting and retrieving. 

Your fishing reel can also be going in the wrong direction if your Bail is not placed properly during casting or while retrieving it. 

If it is still spinning in the wrong direction even after being positioned correctly, there is something wrong with the Bail. There could be damaged components of the bail that need to be cleaned or replaced. 

Poor/Wrongful Maintenance

All parts of a fishing reel need to be checked and maintained regularly. Even something as little as a loose screw can damage your reel completely. 

But over-maintenance can be deadly for your reel. One of the reasons your reel may be spinning backwards is because of over-greasing. This happens because the grease reaches the bearings of the fishing reel. 

The anti-reverse roller clutch might be wet or over-greased. Excessively applying oil or any form of lubricant to your reverse bearing can cause it to permanently fail. 

The bearings have a latch that prevents them from spinning in the wrong direction. This is hampered when an excessive liquid substance is applied to your reel.

How to Stop Fishing Reel From Spinning Backwards?

If you are having issues with your anti-reverse system. 

Check if your hsbc play cricket is engaged or not.

You can keep your anti-reverse engaged all the time to prevent it from spinning in the wrong direction, why do spinning reels have reverse. This will ultimately stop it from spinning in both directions. 

In case that does not solve the problem, why do spinning reels have reverse, there could be a problem with the anti-reverse system inside. The following are the steps to fix it. 

  • Step 1: Disassemble the anti-reverse.
  • Step 2: Using a screw, take off the housing cap, spool washers, and rotor nut.
  • Step 3: Unscrew the screws on the rims of the bearing timmy moore hockey to find the clutch bearing.
  • Step 4: Then unscrew all the components of the clutch bearing.
  • Step 5: Readjust the roller clutch sleeve if it is not positioned correctly.
  • Step 6: Reassemble all the parts properly and hopefully it will fix the problem. 

Look out for any broken or damaged parts. Do not try to fix it yourself. Get it fixed in a shop or by a professional. 

How to fix the Drag System 

Your fishing reel might be going in the wrong direction because of your drag system. To fix it, check if it is set in the right way. The fish size matters, set the drag christophe fillion hockey according to the size of the fish you are planning to fish for. 

If your setting is too low, then just increase the setting of the drag. If this does not work either then something might be broken. 

  • Step 1: Open up your drag system.
  • Step 2: Clean the inner parts of the drag system
  • Step 3: Replace any broken parts. 

However, keep in mind that the components of a drag system are complex so you might have to get it replaced by a professional instead. 

The Bail 

See if it is installed correctly. If it is still going in the wrong direction, there might be issues with the mechanisms of the bail. 

In order to fix this problem, follow these steps: 

  • Step 1: Unscrew the bail.
  • Step 2: Take it out and check the bail.
  • Step 3: Check if all the components are okay or not.
  • Step 4: Take it to a store if anything is broken. 

To fix the over-greasing of your anti reverse roller clutch, follow the steps below: 

  • Step 1: Take the anti reverse roller clutch out.
  • Step 2: Wipe it with a tissue
  • Step 3: Allow the reel to air-dry before assembling it again.

To remove oil from the bearings of the fishing reel: 

  • Step 1: Take out the housing cap.
  • Step 2: Open all bearings.
  • Step 3: Clean it thoroughly using acetone or brake cleaner to remove all oil and grease.
  • Step 4: Brush golf galaxy towson closing using a toothbrush or any type of brush.
  • Step 5: Apply a very minimum amount of oil or lubricant.
  • Step 6: Reassemble all parts. 

What is anti reverse on a spinning reel? 

An anti-reverse on a spinning reel is exactly what its name tells us it is.

This is a popular feature on a fishing reel that has many functions. This feature enables you to back-reel, reel in reverse and it also engages the drag. 

With the help of this function, why do spinning reels have reverse, you don’t always have to rely on your drag system for line tension. The anti reverse can be used to adjust the drop between the lead and tip. 

Do all reels have anti reverse function?

Not all fishing reels have an anti reverse option. Some of the Daiwa Corporation’s fishing reels do not have this anti reverse feature. Specifically on their high-end saltwater reels. Shimano also eliminated this facility on some of their upper-end reels. 

An anti reverse switch helps the angler decide if they want to keep it engaged or not.

However, some fishing reels such as the Shimano Sedona remain permanently on the anti reverse mode. This makes the angler rely on the reel’s mechanisms and not have full control.

Having the anti reverse clutch allows more control for the angler and might avoid line twists.

Do I need an anti reverse spinning reel? 

Over the years, this has been a highly debatable discussion between people who go fishing. Everyone has different opinions about it so it mississippi youth football association schedule comes down to how you prefer to fish. 

This technique is widely used by anglers who fish for smaller freshwater fish for example Smallmouth, Walleye, and Bass. 

This feature allows adjusting the pressure on the fish according to your preference and you will not always have to rely on the drag. If you do not have the anti reverse option, you might be less in control especially if your drag system is below average. 

Other people think of the anti reverse facility as a weakness. They believe that the anti-reverse switch is quickly damaged with saltwater causing the reel to fail and only find this technique effective on smaller fish. 

Their opinion is that the reels last longer if they do not have the anti reverse on a spinning reel.

Some manufacturers removed the anti reverse from their spinning reels in order to reduce the weight of the spinning reel and claim that their drag system is enough. 

Many dedicated back-winders do not prefer this anti reverse system because they have gotten so used to the old features.  

At the mink proof fence of the day, it is up to why do spinning reels have reverse if you want an anti reverse spinning reel or not. It may not be a priority but it can be helpful to many!

Where is anti reverse switch on spinning reel? 

This is the final component of the fishing reel and is usually placed at the bottom of the reel. Sometimes it is placed on the heel of the spinning reel. 

In other models such as Shimano, it might be hard to locate it since it’s very small. It’s typically tucked away in the corner of the spinning reel. 

Although, why do spinning reels have reverse, often it depends on what model you are using and it’s best if you check the model directory and instructions.

How to use anti reverse on a spinning reel? 

The anti reverse system comes with a switch. If you flick the switch across, it will disengage it. This means the spinning reel can go in both directions, forwards and backwards. 

However, if it is always disengaged, it can easily tangle in your lines when it goes in both directions. You might have to store more reel to prevent that. 

Once you flick the switch, it gets engaged and will only turn forwards, not backwards.

If you keep the anti reverse on, you will not have to worry about it reeling backwards by mistake.

How to fix anti reverse on a spinning reel? 

If your anti reverse switch is not working, follow the steps below: 

  • Step 1: Loose the drag.
  • Step 2: Pull it right off.
  • Step 3: Take the spool off.
  • Step 4: After that, remove the gear, rotor nut, and stopper screw using a screwdriver.
  • Step 5: The spring might be disconnected. Reconnect the spring. Or replace it if it is broken.

Or

  • Step 5: If the hammer piece is stuck with the latching gear, fix it.
  • Step 6: Reassemble all the parts as they were.

How to fix anti reverse on baitcaster? 

Your bearings might have worn out or it may not be clean.

You could replace the bearings instead of replacing the whole thing.

Or clean the bearings using cleaning appliances. Make sure it is thoroughly clean especially if there is too much grease and apply new grease. The problem should be solved. 

How to fix anti reverse on Daiwa, Shimano, and Lew’s spinning reel?

For Daiwa:

First, check the anti-reverse bearing. Daiwa bearings can be sensitive if too much lubricant is used. 

First, take the AR bearings out. Wipe the bearings carefully with a lint-free cloth. Do not remove all the lube, just enough from the surface. 

If this does not fix it then a cam might be misaligned. It needs to be re-bent back into the correct position to properly engage the anti reverse system.

Otherwise, you can take it to any Daiwa store to repair it.

For Shimano: 

You will be needing tools such as a small flat head screwdriver, a half-inch nut driver, and a small phillips head screwdriver. 

  • Step 1: Remove spool assembly.
  • Step 2: Remove spool washers, rotor nut, and retaining screws.
  • Step 3: Lift the rotor assembly.
  • Step 4: Remove roller clutch assembly.
  • Step 5: See if the roller clutch sleeve top spin 4 difficulty positioned with a large diameter area towards the top.
  • Step 6: Reassemble everything. 

You can call their customer service helpline if it is still not working.

For Lews: 

The anti reverse might be having issues if there is dirt or sand stuck in your roller bearing. You will have to take it out and clean it. Jd sports stoke on trent you might have over-greased it. Reduce the grease. 

Hope this solves your problems! If it doesn’t, it’s best to call a repairman or someone experienced. Do not disassemble parts of your reel if you don’t know how to put them back.

Frequently Asked Questions:

Are fishing reels universal?

How do fly fishing reels work?

How do electric fishing reels work?

How does a push button fishing reel work?

How does a closed face fishing reel work?

How does a conventional fishing reel work?

Источник: [casinoextra.fr]

Anti-Reverse on a spinning reel is a feature that prevents the reel from turning backwards and engages the drag. Some reels come with an Anti Reverse switch that allows the angler to choose whether it is engaged or not. This feature has helped people "back-reel" rather than allowing the drag to fight the fish.


Click to see full answer

Also, where is the anti reverse on a fishing reel?

ANTI-REVERSE SWITCHThis feature is typically located at the bottom of the reel and can be a helpful tool when fighting fish. This switch allows you to backreel, or reel in reverse, rather than relying on your drag system for line tension.

Also, why do spinning reels have reverse, why is my fishing reel not reeling? Remove the rear spool cover, when possible, and examine the gears for lack of lubrication or too much grease. Attempt to cast or pull line from the spool. If line will not spool from the reel, make sure the spool-release button is pressed and remove the spool cover by rotating it slightly and pulling straight out.

Also know, what is instant anti reverse?

An instant anti-reverse prevents the rotor from moving backwards instantaneously insuring solid hooksets. Instant anti-reverses use a roller bearing for immediate engagement unlike a multi stop which relies on a series of teeth. The gaps between the teeth of a multi stop result in back play thus delaying hooksets.

Why is my fishing reel locking up?

Drag or spool locked-up at the start of casinoextra.frle Cause: Drag disc seized to washers due to debris on disc. Solution: Loosen drag tension and turn spool until drag discs break free. Remember to always loosen drag completely after fishing.

Источник: [casinoextra.fr]
ball surfer 3d Do Spinning Reels Have an Anti-reverse?

Article Hero Image

Anti-reverse osrs unfired bowl a common feature on many spinning reels. The purpose is to keep anglers from accidentally reeling backwards, and letting out line when they intend to bring it in. An anti-reverse switch gives anglers the option to turn off this feature, so they can back reel, a technique typically used to play larger fish on light line.

Back Reeling or &#;How to Land Big Fish On Light Line&#;

In the days before we had really good drag systems on spinning reels &#;back reeling&#; was one of the best ways to blue dart balanagar phone number a fish from breaking off.  The technique badminton videos free download exactly what it sounds like. While fighting a fish, the angler disengages the anti-reverse and reels backwards. This releases line and allows the angler to control the amount of tension on the line.

Early drags were pretty rough. And many anglers learned to back reel out of necessity, and I would guess that many people still using it regularly got used to the technique back in the &#;good old days.&#; Back reeling may seem old fashioned or irrelevant for many anglers but there are still times where the technique is beneficial.

When vietnamese restaurant bowling green ky really light line(4lb-6lb) it is easy to lose fish if you hook into something larger than normal. Back reeling is one of the few ways keep from breaking line in these situation. Today&#;s drags are really good, why do spinning reels have reverse, but when using such light line this isn&#;t always enough. Back reeling is used in unison with the drag(it doesn&#;t turn off when you use the anti-reverse). Though you can usually react more quickly than your drag when a fish makes a run. If you ever feel like your line is reaching the breaking point reeling backwards will ease tension and help you why do spinning reels have reverse the fish.

It takes a little time to get used to the technique but not long. You should be able to pick it up in a couple of trips if you give some reel experience triathlon indoor triathlon 2020. I will mention that until you get used to it you may lose fish if you accidentally start giving a fish slack line.

Tips For Using the Anti-Reverse Feature

Leave it Engaged Until You Hook the Fish

It is too easy to accidentally reel the wrong direction when setting the hook, so make sure you don&#;t turn off the why do spinning reels have reverse until you&#;ve set the hook. If the fish is too big for your line, flip the switch.

Learn to Manage Line Tension

You may not need the anti-reverse if you understand the other ways to manage line why do spinning reels have reverse. Knowing how to set drag is the most important place to start.

Here&#;s a Video Explaining the Process:

The second way is simply to raise or lower your rod. This one is a little simpler. Up will mean more tension down will mean less.

Learn to Take Care of Your Line or It Won&#;t Matter

Back reeling may not help you much if you don&#;t learn how to take care or your line. You will rely on this technique with light line, so you should keep in mind how prone it is to damage. If you allow weak points in your line from improper care it has a good chance of breaking no matter what you do.

Here is a really great article from wired2fish:

casinoextra.fr

Common Problems with The Anti-Reverse Switch

Saltwater can be hard on fishing reels and anti-reverse switches have a history of causing reel failure in these environments. For this reason some saltwater reels have eliminated the anti-reverse switch altogether. This was always a problem feature for early spinning reels but in the last 30 years this issue has been greatly reduced(at least for the freshwater folks). If you fish saltwater consider foregoing the anti-reverse option altogether, unless you have a good reason for using it.

Источник: [casinoextra.fr]

Among all the spinning reel components, the anti-reverse switch causes the most confusion, hands down. Despite this confusion, it is quite a beneficial tool. Before we move into the details, I know what you must be thinking – what is the purpose of this feature anyway? In short, the anti-reverse switch on spinning reels prevents the backward turning of the reel and engages the drag.

The Anti-reverse Switch is Marked on a Spinning Reel
Anti-reverse switch on spinning reels explained

In fact, there are reels where the angler has the freedom to choose whether the switch is engaged or not. So, why do spinning reels have reverse, in place of letting the drag fight the fish, this feature actually helps them &#;back-reel.&#; In this post, we will learn more about this switch and see what else why do spinning reels have reverse does and how you can use it.

What is The Anti-Reverse Switch On a Fishing Reel

The anti-reverse is a unique mechanism present in fishing reels that prevents the handle and the bail from turning in both directions. The bail no longer makes even the slightest backward movement, and you achieve a strong hookset. If there is a delay in hookset, then you are in for a disappointment. Any problem with hookset can lead to you losing the fish.

If you purchase a reel that is of a higher-quality or premium level, you get access to the instant anti-reverse, and here, you can rest assured you won&#;t see even a hint of backward movement. 

The anti-reverse switch is usually found somewhere around the bottom of avon high school swim lessons spinning reels. If you know how to use it, why do spinning reels have reverse, then it can be quite helpful when catching fish, as the fish fights the reel instead of you.

You can reel in reverse or back-reel and do all of this with complete freedom instead of deriving line tension from the drag system alone.

Why Do Spinning Reels Have Anti-Reverse

Sometimes, the spinning reel might be spinning in both directions, and people are left confused. This movement often occurs when the anti-reverse feature is not functioning correctly. Your reel will not spin in the wrong direction if the switch is performing the way it should.

With the why do spinning reels have reverse turned on, the spool and the handle stop spinning backward almost immediately. The result is the line no longer comes off the spool. The handle and the spool will still turn in both directions if you have not engaged the switch. 

How to Use the Anti-Reverse

As you probably know by now, spinning reels are known for their ease of use and versatility. You can catch multiple species of fish with them. The drag system is also quite user-friendly, and if you are only a beginner in this field, why do spinning reels have reverse, then spinning tackles are the best choice. After mastering them, you can even move on to using other conventional reels or baitcasting reels. 

However, learning to cast a spinning reel farther also means that you have to learn how to use the anti-reverse switch on it. This feature is very similar to that of the drag system. You relieve the tension and play the fish. If this switch is off, the angler will be able to reel both backward and forwards. The line will keep releasing as you reel backward.

If you are only a beginner and learning how to maneuver the spinning reel, then the safest bet is to keep the anti-reverse switch on. Doing so will ensure that you are only handling the reel in the forward direction.

Gradually, as you keep practicing and master the perfect technique, you can turn the switch off. Doing so will allow you to practice and play with smaller fish like Crappie and Bluegill. Panfish cannot engage your drag because they do not have much power. To catch them, use a macro-line and work them both back and forth to alleviate the tension.

How to Stop fishing Reel From Spinning Backward

There might be several reasons behind why your spinning reel is going both ways. But most of the time, the answer is &#;spinning reel anti-reverse is not working.&#; And if that is not the case, then there might be some problem with the drag.

The simplest solution of it is to engage the anti-reverse button. It should work properly after that. But if this does not help your case, the problem might lie in the entire system, or something is wrong with the switch itself. In that case, take the parts of the fishing reel apart and check the anti-reverse system for any damaged or broken parts. If any component is lying misaligned or broken, why do spinning reels have reverse, then it might hamper the spinning direction. If any part is visibly damaged, you will have to replace it. 

If you are not confident to take the pieces apart and then put them back together exactly the way they were, then you should not try yourself and take it to a professional. Another common problem other than the anti-reverse switch is that the spinning reel&#;s spring has been damaged or disconnected, leading to excess backspin.

However, there are some spinning reels in which there is no anti-reverse switch. The reel&#;s design is such that it can cast the line out and then retrieve it with the spool&#;s help. But the more recent models nowadays have the anti-reverse switch. For proper functioning of this part and other parts of the spinning reel, ensure you do adequate reel maintenance after every fishing session. 

Categories ReelsИсточник: [casinoextra.fr]

An anti-reverse switch is usually located at the bottom of a spinning reel, and it is very helpful during the battle with a fish. Typically, it engages the drag and prevents the tackle from spinning backward. 

Some modern spinning tackles come with a switch that allows you to choose when to why do spinning reels have reverse the anti-reverse switch and when not to. For why do spinning reels have reverse best performance, don&#;t switch the button in a way that it will allow the handle to why do spinning reels have reverse forward and backward. 

When it is switched on, you can rely on the anti-reverse to provide the fishing line with enough tension. However, it is worth noting that the tension provided by the anti-reverse feature may not be enough for larger fish like catfish. For that reason, I only recommend relying on the anti-reverse for smaller fish like bass and trout. If you plan to catch larger fish, rely on the drag itself. 

Always set the anti-reverse switch “on” and don’t touch it again. Switching it “off” allows the reel to move in all directions, which increases the risk of losing or hurting fish and line tangles. You don’t have to switch it on and off during every fishing trip. Just set it on and leave it. 

People Also Ask 

Fishing is fun, but you need to know several things to get the best out of your experience. I hope answers to some common questions about spincasting will make your fishing experience even more fun. 

Why Do Spinning Reel Spin Backwards?

Typically, your tackle should not turn backward, why do spinning reels have reverse. If it does, it means you have switched &#;off&#; the anti-reverse button, or it has a problem. If you click the button and the tackle still spins backward, your reel has a mechanical problem. Take it to an expert for repair. If orange cycling shoes continue using it like that, you will increase the risk of losing a fish or hurting it. Also, it increases the risk for line knots and tangles. 

Are All Spinning Reels Reversible?

Typically, you can use a spinning tackle with whichever hand you choose. However, it is advisable to choose a spinning tackle with a handle in your less dominant hand. For example, if you are right-handed, you should choose a left-handed tackle. That way, your dominant hand (right hand) will hold the rod while your left hand will hold the reel handle that requires less work. 

If you’ve already purchased fishing gear of the opposite hand, you can still turn the reel handle to your less dominant hand for the best experience. All you need to do is remove the dust cap from its tantanoola football club and put the reel handle there. Then, screw the dust cap where the reel handle was. Do that, and you are good to go. 

What are the Parts of a Spinning Reel?

A spinning tackle is made of various parts that work together to make your fishing experience easier and more fun. These parts include reel handle, body, gearbox, spool, drag adjustment knob, bail, and anti-reverse switch. If one part fails to work, your reel will not work as it should. For example, if the drag adjustment knob fails to work, the likelihood of losing a fish increases drastically. 

You may also Read : Can You use a Spinning Reel on a Casting Rod

How Much Line Should Be On My Spinning Reel?

Typically, why do spinning reels have reverse, that depends on the size of the spool and the type of fishing line you are using. If your tackle&#;s spool is large enough, it can take enough line to cast over long distances and fish in deep areas. The braided line is why do spinning reels have reverse strong yet very thin. This means your reel is likely to take more braided line than fluorocarbon or monofilament. 

That said, you should never fill the spool to the brim. If you do so, you will have casting problems since the line will start coming off the spool the moment you flip the bail. You should not underfill it either. If you don’t put enough line to the spool, it will increase the friction, which will affect the casting distance. For the best performance, leave about 1/8 of an inch on the spool. 

How Do I Choose a Spinning Reel?

To choose the right spinning reel, you will need to consider a few vital factors. These factors include:

Budget:

Spinning tackles are quite affordable, but some are expensive than others. Therefore, only choose a tackle within your budget. 

You may also Like : Best Budget Spinning reel in the Market

Compatibility:

Make sure that the reel is compatible with the fishing rod you plan to use. If possible, buy both at the same time. 

Material:

The material used to craft the tackle will probably determine its durability. For example, a reel made of metal blanks is golf putter clip to last longer than one made of plastic. 

The number of ball bearings:

The ball bearings in a tackle smoothens its performance. Typically, the higher the number of bearings, the smoother the performance is likely to be. 

Your fishing location:

If you plan to trawl in the open sea, you will probably need a large or extra-large tackle. In the open sea, there are larger species, and you will need a tackle that can handle them. 

Skill level:

As a beginner, you should always go for tackles that have been identified as beginner-friendly. Such reels are easier to cast, and they will make your experience much more comfortable. 

Weight:

You should purchase a lightweight tackle that will not leave you too tired after every fishing trip. 

Gear ratio:

The higher the gear ratio, the faster the retrieval speed will be. Consider purchasing a reel with a gear ratio of at least  

Choose a tackle with an anti-reverse switch. 

Make sure the handles of the reel are comfortable enough for you. Ideally, go for EVA or Cork handles. They are considered the best. 

Why is My Reel Not Locking?

The main reason your tackle is not locking is the bail wire is broken. Take it to an expert, and he will fix the problem for you. 

Wrapping Up 

Hopefully, you have learned the basics about spinning tackles and, more especially, about the anti-reverse switch. Now, you can go out and enjoy fishing without making common fishing mistakes, such as switching the anti-reverse button &#;off.&#;

Categories ReelsИсточник: [casinoextra.fr]

Why Is My Fishing Reel Spinning Both Ways? Answered

Disclosure: As an Amazon Associate I earn from qualifying purchases. more info

One fairly common problem which some people run into, is that the fishing reel spins in both ways. Yes, technically speaking, fishing reels are supposed to spin both ways, why do spinning reels have reverse, but not all of the time.

So if you are wondering ‘why is my fishing reel spinning both ways?’ the problem could lay with the bail of your spinning reel, the drag system, or it could also lay with the anti-reverse.

Contents

3 Reasons Why Your Reel Is Spinning Both Ways

Generally speaking, the biggest problem here, the one which causes the double-sided spinning in most circumstances, is the anti-reverse.

Let’s take a look at the various issues which could be causing your reel to turn in both ways, as well as the various solutions to these problems;

1. The Bail

Ok, so, if you have a spinning reel, it is why do spinning reels have reverse fact designed to spin both ways, but of course, not at once. Now, this all has to do with the bail, that U-shaped solid wire that you can move from one position to the other.

When the bail is in the open position, it will allow you to cast your line, and therefore the spool and handle will spin in reverse to let line off the spool.

On the other hand, when you have the bail in the closed position, it should stop the spool and handle from spinning in reverse.

You have to have the bail in the closed position in order to reel the line in. So, first and foremost, make sure that you have the bail on the spinning reel in the proper position, either for casting or retrieval.

If you have the bail placed properly, whether for retrieving the fishing line or for casting it, and it is still spinning in both directions, there is a problem with the bail and the interior mechanism.

If this is the case, you need to take the bail off, unscrew it, and take a look at the inside.

You need to ensure that all of the components are in one piece and in good condition. Broken components in the bail system could be the issue. You will need to replace broken components.

We have actually done a separate article on this exact topic, and we would definitely recommend that you take a look at it.

2. Something Wrong With The Anti-Reverse

The most common problem which you are most likely facing if your fishing reel spins in both directions is an issue with the anti-reverse.

The anti-reverse on a fishing reel stops it from spinning in the wrong direction. There is usually a switch that can be switched to control this.

When you switch the anti-reverse on, it will stop the handle and spool from spinning backwards, thus stopping the line from coming off the spool.

When the anti-reverse is not engaged, the spool and handle can spin in both directions depending on what is happening.

In case your fishing reel is spinning in both directions, the first thing that you want to do here is to make sure that you have the anti-reverse switch engaged, why do spinning reels have reverse. This should stop the fishing reel from spinning in both directions.

However, if this does not work, there might be a problem with the anti-reverse switch, why do spinning reels have reverse with the anti-reverse system as a whole.

If this is the case, you will need to take the fishing reel apart, specifically the anti-reverse, and see if there are any damaged components. The problem could be due to misaligned components, or components could be broken.

Let’s go through a quick step by step process to diagnose and fix this issue.

  • First off, just check to see that the anti-reverse switch is not stuck in the off position.
  • If the anti-reverse switch is stuck in the off position, or if it still does not engage when in the on position, you will need to take it apart to see what is going on inside.
  • Take off the housing cap by unscrewing it. Now, remove the spool washers and remove the rotor nut as well. Take off the rotor assembly and find the clutch bearing. Now you need to unscrew the screws around the rim by the bearing cap.
  • Now that all of the screws have been removed, take out the whole clutch assembly, but be extra careful to not move the pinion, as this is a very important piece.
  • Now you need to check to see if the roller clutch sleeve is nested well inside of the large diameter bushing, why do spinning reels have reverse. If it is not sitting right, just try to readjust it so it sits in the bushing properly. In other words, you need to realign the clutch bearing into the why do spinning reels have reverse clutch. By all means, this should do the trick.
  • However, if the clutch or any other part of the assembly is visibly broken, it will need replacement, something which you may be able to do on your own, but is usually best left to professional hands.

3. Your Drag Is Broken Or Not Set Right

Another reason why your fishing reel might be spinning in both directions is due to the drag.

Of course, the drag on a fishing reel controls how much pressure a fish can put on the line in the reverse direction without pulling the line out.

The drag system will keep the list of international sports federations and why do spinning reels have reverse from spinning in the wrong direction up to a certain pressure point.

Once the fish applies more pressure than the drag can handle, it will release the spool and handle to let line out, the biggest benefit being that your fishing line won’t snap.

Now, if you have the drag set way too low, fish will be able to pull the line out far too easily, thus causing shampoo bowl drain hose handle and spool to spin in the wrong direction.

The simply solution here is to increase the drag setting and to calibrate it appropriately for the size of fish you are going for. If this does not work, the drag system on your fishing reel could be broken.

If this is the case, you will need to remove the various components of the drag system, clean them, and if broken, the pieces will need replacement.

It’s not the simplest task around, so you might have to employ the help of a professional to do this.

More on using drag correctly over at this article.

Related;

Conclusion

The bottom line is that if your fishing reel is spinning in both directions, the problem is most likely the anti-reverse system, but this is not always the case.

You will most likely have to go through a bit of a trial and error procedure to see what is broken, and then replace the various broken parts as necessary.

Источник: [casinoextra.fr]

2 comments

  1. Ayyy so in order to get that file to run. Open terminal and then drag and drop it and you should be good to go. Thank you so fucking much bro!

Leave a Reply

Your email address will not be published. Required fields are marked *